• How do I know what number of nodes, cores, memory etc to ask for my jobs?

• How do I find out whether a cluster/partition supports these resources?

• How do I find out whether these resources are available on the cluster?

• How long will I have to wait in the queue before my job starts? How busy is the cluster?

• How do I monitor the progress of my job?

• My job finished before the wall time - what happens?

• How do I know what number of nodes, cores, memory etc to ask for my jobs?

  • Understand your software and application. 

    • Read the docs – look at the help for commands/options.

    • Can it run multiple threads - use multi cores (OpenMP) / nodes (MPI)?

    • Can it use a GPU? Nvidia cuda.

    • Are their suggestions on data and memory requirements?

• How do I find out whether a cluster/partition supports these resources?

• How do I find out whether these resources are available on the cluster?

  • Consult the wiki: Medicine Hardware Summary Table

• How long will I have to wait in the queue before my job starts? 

  • How busy is the cluster? 

  • Current Cluster utilization: Commands sinfo / arccjobs / pestat and OnDemand’s MedicineBow System Status page.

• How do I monitor the progress of my job?

  • Slurm commands: squeue

• Not defining the account and time options.

• The account is the name of the project you are associated with. It is not your username.

• Requesting combinations of resources that can not be satisfied: Medicine Hardware Summary Table

  • For example, you can not request 40 cores on a compute node with a max of 32.

  • Requesting too much memory, or too many GPU devices with respect to a partition.

• My job is pending? Why? 

  • Because the resources are currently not available.

    • Be mindful of specialized nodes (such as our huge mem with 4T of RAM) we might only have a few of them.

  • Have you unnecessarily defined a specific partition (restricted yourself) that is busy? 

  • We only have a small number of GPUs.

  • This is a shared resource - sometimes you just have to be patient…

  • Check current cluster utilization.

  • What ever resources you are asking for are currently not available. Slurm will start you job when they become available.

  • We do empathize and under the frustration, but this is a shared resource, and sometimes we just have to be patient and wait in the queue.

• Preemption: Users of an investment get priority on their hardware.

  • We have the non-investor partition.

When we have schedule maintenance on the cluster, an announcement will go out and indicate the date/time that this is scheduled to start.

All jobs currently running on the cluster are allowed to finish, and we can aspect further jobs if Slurm can complete them before the maintenance starts.

Be conscious of: If an announcement goes out on a Monday that maintenance is to start on the following Friday, there is only a window of four days that any new job must complete within.

If you submit a job with a wall time of seven days, then this can not and will not be started since it can not complete before Friday.

You job will be accepted by Slurm, queued, have a status of pending, and automatically started once maintenance is completed and Slurm is restarted.

Remember: By default you must define the project (account) you’re using and a walltime.

[]$ salloc
salloc: error: You didn't specify a project account (-A,--account). Please open a ticket at arcc-help@uwyo.edu for help.
salloc: error: Job submit/allocate failed: Invalid account or account/partition combination specified

# The bare
minimum:
[salexan5@mblog2 ~]$ salloc -A arcc <project-tname>
10salloc:00 sallocerror: GrantedYou jobdidn't allocationspecify 1250349a salloc: Nodes mbcpu-025 are ready for job

If you need to explicitly request a partition, the name must be correct:

[]$ salloc -A <project-name> -t 10:00 --partition=mb-l40
salloc: error: invalid partition specified: mb-l40
salloc: error: Job submit/allocate failed: Invalid partition name specified

Use the sinfo command to get a list of know partitions, as well as detailing their current use:

# Corrected:
[]$ salloc -A arccanetrain<project-name> -t 7-0010:00:00 --partition=mb-l40s
salloc: GrantedPending job allocation 12516511250907
salloc: job Nodes1250907 mbcpu-010queued areand readywaiting for resources
salloc: job

Timeouts aren’t errors as such, just that the time you requested was not long enough to compete the computation.

The maximum allowed wall time is 7 days:

[]$ salloc -A <project-name> -t 7-00:00:01
salloc: error: Job submit/allocate failed: Requested time limit is invalid (missing or exceeds some limit)

[]$ salloc -A arcc<project-name> -t 107-00:00:00
-c 100
sallocsalloc: error:Granted CPUjob count per node can not be satisfiedallocation 1251651
salloc: error: Job submit/allocate failed: Requested node configuration is not available

Do not request 7 days just because you can!

Wall time is considered when Slurm tries to allocate your job.

A job is more likely to be back filled (slotted onto the cluster) in busy times than pending jobs will longer wall times.

ARCC can provide users with wall times longer than 7 days.

Please contact use, but we require that you can demonstrate that you job can not be optimized, for example:

• Can it run faster by using more cores, or even multiple nodes?

• Can it utilize GPUs?

• Can the job actually be divided up into sections that can be run concurrently across multiple jobs?

ARCC can provide assistance with trying to understand if a job can be optimized.

This is caused because you’re trying to request a configuration that isn’t available, or requires more details: For example:

[]$ salloc -A <project-name> -t 10:00 -c 100
salloc: error: CPU count per node can not be satisfied
salloc: error: Job submit/allocate failed: Requested node configuration is not available

[]$ salloc -A <project-name> -t 10:00 --gres=gpu:1
salloc: error: Job submit/allocate failed: Requested node configuration is not available
salloc: Job allocation 1253677 has been revoked.

[]$ salloc -A <project-name> -t 10:00 --gres=gpu:1 --partition=mb-a30
salloc: Granted job allocation 1253691
salloc: Nodes mba30-001 are ready for job

Segmentation faults are typically caused by an application trying to access memory outside what has been allocated to the job.

Basically, you job is out of memory of what it requested.

Resolved: Request more memory using either the mem or mem-per-cpu .

• As discussed in the Intro to HPC workshop, we have a Condominium Model where if your job is running an a compute node that is part of another project’s hardware investment, your job can be preempted.

• Your job will be stopped and automatically re-queued and when resources come available on the cluster, it will be restarted.

• Further details can be found on our Slurm and Preemption page and how to use the non-investor partition to prevent this from happening.

When I run pestat, it appears that my job is one of many on a particular compute node.

[]$ pestat -n mbl40s-001
Select only nodes in hostlist=mbl40s-001
Hostname         Partition     Node Num_CPU  CPUload  Memsize  Freemem  Joblist
                              State Use/Tot  (15min)     (MB)     (MB)  JobID(JobArrayID) User ...
mbl40s-001         mb-l40s     mix   64  96   55.62*   765525   310618  1480439 hbalantr 1440260 vvarenth

As discussed in the Intro to HPC workshop when talking about Compute Nodes this is perfectly acceptable and one of the tasks that Slurm manages.

Remember: All jobs are independent and do not affect anyone else.

General Use Case: You have a job running on the cluster, from which you’d like to submit further jobs.

General Answer: Yes.

If you have the scripting ability, then you can write code that creates a submission script, and then calls the sbatch command.

This submission will be treated as any other submission and be added to the queue, and depending on the current cluster utilization might be pending before it starts running.

This can also be performed from scripts that are already running as part of a job.

Is this a good idea? Again yes. There are existing applications that do exactly this, and with some extra Slurm understanding, you can have jobs that are dependent on other jobs i.e. job B won’t start until job A is completed, basically breaking a pipeline down into a sequence of jobs.

Note: There is a maximum number of jobs that Slurm can accommodate within the queue (currently set at 75K), do not try submitting more that this in one batch, and you will need to throttle their submission i.e. submit say 10 every second.

If you try submitting 1000s in a single call then you can affect Slurm. Be a good cluster citizen.

If you have a Linux session running in a terminal, in which you have an salloc interactive session running, and your terminal session closes, or is interrupted for any reason, your interactive session will be stopped.

From the command-line you can not go back into it, you will have to start a new interactive session.