Versions Compared

Old Version 26

changes.mady.by.user Lisa Stafford

Saved on

compared with

New Version 27

changes.mady.by.user Lisa Stafford

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

MedicineBow OnDemand (formerly named Southpass on Beartooth) is ARCC’s latest implementation of OnDemand. It is a publicly accessible site for access to ARCC’s newest High Performance Computing resource, MedicineBow.

...

  • You must have an account on the MedicineBow Cluster to access the site. (See here to get started with ARCC)

  • You must set up 2-factor authentication setup (Two-factor Authentication )

  • You do not need a VPN connection to log into MedicineBow OnDemand.

Excerpt
nameConnecting to MB OnDemand

How to Log In

MBOnDemand is available on and off campus from the https://medicinebow.arcc.uwyo.edu website and will require UWYO 2 Factor Authentication be set up for all UWYO accounts.

When browsing to the site, you will be presented with UW’s ARCC’s Login Screen. As a good cybersecurity practice, make sure the website reflects an arcc.uwyo.edu website address before putting in your uwyo username and password. ARCC’s MedicineBow Login Screen should display the following login screen:

Panel
panelIconIdatlassian-check_mark
panelIcon:check_mark:
bgColor#FFEBE6

All UW Users will need authenticate to UWYO using 2 factor authentication.

After entering

If you do not receive any 2 factor prompt, log into: https://wyosecure.uwyo.edu and check your default 2 factor settings to make sure you’re not locked out of 2 factor, and that your default 2 factor method is accurate.

You will hit the <enter> or <return> key, after you enter your username and password, hit <enter/return>
(If using yubikey for 2 factor authentication do not hit return. Directions for login with yubikey can be found below.) unless you are using a yubikey.
**If you are using a yubikey, see the section below on authenticating with a yubikey.

Otherwise, you may authenticate with 2 factor as you would normally by using the 2 factor authentication method you have as your default as set in your https://wyosecure.uwyo.edu settings. (Usually default is to receive a push on your default duo device. If you have never set up duo on any device, you may receive a phone call on your default phone number). Specific login instructions for each 2 factor method may be found here.

If you have not set up a default method for 2 factor authentication, you may be provided with a list of options to 2-factor authenticate, similar to the following screenshot:

If provided with an option select one now, to authenticate. Otherwise, you should have received your default method for 2 factor authentication.

Once you have authenticated through a two factor mechanism, you should see the MBOnDemand dashboard.

If using a yubikey for 2 factor authentication: you will enter your uwyo username in the username field, and your UWYO account password in the password field, followed by a comma (,) then touch your yubikey to authenticate.
Note: After you’ve entered your password and the comma, do NOT hit enter. Instead, your login prompt should look like this:

then without hitting enter, touch the yubikey to provide 2 factor authentication.

This will log you in.

...